PIC USB Programmer

[mizk_electro]

I'm use a GTP USB Lite programmer, the best , and totally free.
Support all F series and dsPIC chip.
http://perso.wanadoo.es/j1m/proyecto...lite/index.htm


Original version is here , http://perso.wanadoo.es/siscobf/winpic800.htm .
This version support ZIF adapter for F series and ICSP.
The zip files included : schematic, soft programmer (the best), firmware (18F2550) and USB drivers.


Enjoy it.






This version is a ICSP programmer.

Sanpic,

Can you upload/share the WORKING GTP-USB Lite programmer .... schematic,firmware(hex code),PCB & guide(if any) ... if possible in zip format.

I tried many sch & firmware on the net but fail ....

If you can share it, I thks you very very very much ... Now I'm using laptop with no serial port & i need to go to my friend house (40km ++) just to program PIC .... real badddddd ....

[mister_e]

by a USB to serial adapter. It's under 20$ now and always usefull.