dumb question

[osceola]

Ok,I did it now,I ansemble the two codes toghether and now are blinking both Leds.

'****************************************************************
'*  Name    : P16F690.INC                                       *
'*  Author  : [select VIEW...EDITOR OPTIONS]                    *
'*  Notice  : Copyright (c) 2009 [select VIEW...EDITOR OPTIONS] *
'*          : All Rights Reserved                               *
'*  Date    : 25/08/2009                                        *
'*  Version : 1.0                                               *
'*  Notes   :                                                   *
'*          :                                                   *
'****************************************************************
 '16F690 DEMO
  '  
    DEFINE OSC 8       'Comment the 4Mhz and uncomment these for 8Mhz
    OSCCON=%01110000

    DEFINE OSC 4           'This is the default setting
    OSCCON=%01100000
      
    @ device  pic16F690, intrc_osc_noclkout, wdt_on, mclr_on, protect_off
  
     TRISC = %00000000   '0 will make the pins an output, 1 will make them inputs
     'VARS
    LED1    VAR PORTC.0
    LED2    VAR PORTC.1
    START:
    HIGH LED1
    LOW  LED2
    PAUSE 250
    LOW  LED1
    HIGH LED2
    PAUSE 250
    PORTC = %00000001
    PAUSE 250
    PORTC = %00000010
    GOTO START

With this code is blinking LED 1 and 2