dumb question

[mackrackit]

Using PM.
Did you change the code to work with PM. The way I have it posted it is for MPASM.
Maybe I confused things the way I did it. I was wanting to show both ways.

[osceola]

Yes,I change code,but would be easy for start with using just 1 tipe of code.Thank you

[osceola]

Whats next ?

[mackrackit]

Whats next ?

So you got the LEDs blinking? Did you get a button working to change the way the LEDs blink?

Post your code so we can take a look.

[osceola]

I have compiled and anssemblex and importing hex file in pickit2 and write to PIC.with this code only the second Led from the board is blinking and when press buttonthe Led is not blink.
[code]
'16F690 DEMO
' DEFINE OSC 8 'Comment the 4Mhz and uncomment these for 8Mhz
' OSCCON=%01110000

DEFINE OSC 4 'This is the default setting
OSCCON=%01100000


' @ device pic16F690, intrc_osc_noclkout, wdt_on, mclr_on, protect_off

'VARS
LED1 VAR PORTC.0
LED2 VAR PORTC.1

START:
HIGH LED1
LOW LED2
PAUSE 250
LOW LED1
HIGH LED2
PAUSE 250
GOTO START
[code]

The 2 code dont work
[code]
'16F690 DEMO_2
' DEFINE OSC 8 'Comment the 4Mhz and uncomment these for 8Mhz
' OSCCON=%01110000

DEFINE OSC 4 'This is the default setting
OSCCON=%01100000

'The first line is if you are using PM, the second if you are using MPASAM
' @ device pic16F690, intrc_osc_noclkout, wdt_on, mclr_on, protect_off


TRISC = %00000000 '0 will make the pins an output, 1 will make them inputs

START:
PORTC = %00000001
PAUSE 250
PORTC = %00000010
GOTO START
[code]
I get this errors:
Error LED2.ASM 45 : [225] undefined symbol 'osccon'
---------------46-------------------------'trisc'
---------------49-------------------------'portc'
Fatal----------49 : [300] too many errors

[mackrackit]

Did you comment the lines in the 16F690.inc file that is in the PBP directory? Like the config thread pointed out.

In MCS do you have the box checked to use MPASM?

[osceola]

Did you comment the lines in the 16F690.inc file that is in the PBP directory? Like the config thread pointed out.

In MCS do you have the box checked to use MPASM?

In MCS box in unchecked,and where do I find the .inc file of PIC16F690?