Thank you Melanie for your answer I got it now.Where can I find a schematic or something to test that,or who could give me an advice on how to built this?
|
Thank you Melanie for your answer I got it now.Where can I find a schematic or something to test that,or who could give me an advice on how to built this?
Last edited by osceola; - 16th August 2009 at 22:11.
|
No one wants to help me?
|
Which way do you want to go?
If you go with the I2C method then take a look at the PBP manual. There is enough information there to get you started.
The section in the manual about shiftin/out along with a data sheet will also get you started in that direction.
Let us know the parts you plan on using.
Dave
Always wear safety glasses while programming.
|
Well,first I need a schematic,and I also would like to know if the F2F decoding can be done inside a PIC(16f628, 16f84 etc.) to make it as simply is posibile.So,can the F2F decoding be done inside a pic and witch series of EEPROM to use for that,24C512 or 24LC512?
|
Could anyone provide me a schematic of this or help me find it?
|
Have you read the data sheet for the F2F part you plan to use?
Dave
Always wear safety glasses while programming.
|
Not yet,Im looking around to see if is on the market a PIC with F2F built in,soon as I decide I contact you
|
yes ,I have read the data sheet and have some schematic too,just that comes with an lcd and need to make it moore simple,keep the existing components and remove the lcd components.any help?I will PM you the schematic.thank youOriginally Posted by mackrackit
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks