I have compiled and anssemblex and importing hex file in pickit2 and write to PIC.with this code only the second Led from the board is blinking and when press buttonthe Led is not blink.
[code]
'16F690 DEMO
' DEFINE OSC 8 'Comment the 4Mhz and uncomment these for 8Mhz
' OSCCON=%01110000
DEFINE OSC 4 'This is the default setting
OSCCON=%01100000
' @ device pic16F690, intrc_osc_noclkout, wdt_on, mclr_on, protect_off
'VARS
LED1 VAR PORTC.0
LED2 VAR PORTC.1
START:
HIGH LED1
LOW LED2
PAUSE 250
LOW LED1
HIGH LED2
PAUSE 250
GOTO START
[code]
The 2 code dont work
[code]
'16F690 DEMO_2
' DEFINE OSC 8 'Comment the 4Mhz and uncomment these for 8Mhz
' OSCCON=%01110000
DEFINE OSC 4 'This is the default setting
OSCCON=%01100000
'The first line is if you are using PM, the second if you are using MPASAM
' @ device pic16F690, intrc_osc_noclkout, wdt_on, mclr_on, protect_off
TRISC = %00000000 '0 will make the pins an output, 1 will make them inputs
START:
PORTC = %00000001
PAUSE 250
PORTC = %00000010
GOTO START
[code]
I get this errors:
Error LED2.ASM 45 : [225] undefined symbol 'osccon'
---------------46-------------------------'trisc'
---------------49-------------------------'portc'
Fatal----------49 : [300] too many errors
Bookmarks