Temperiture measurement

[andyf97]

Mackrakit, Jerson.

Thank you for your replies,

Jerson, that kit is very smart and flexible and I am sure it can be configured for many applications, I don't mind learning something new if in the end it saves on development time and removes the need to get out the soldering iron to create a circuit. I just wonder if it might be over complex for what i need and 90% of the system could be redundant.

I am very considering buying the kit and trying it because of its fairly low cost, if I go ahead and by it could you help me a bit to get started?

Also the development kit I saw was for RF systems and I wonder if the chips can be ordered and hard wired into an existing system or what is sold is complete module?


One other question.

My end design will have 10 thermistors to check and that means 20 Leds, could this be done with one Psoc chip + some led drivers



Of course I will read more about this as its very interesting but I welcome any pointers you have.

[mackrackit]

My end design will have 10 thermistors to check and that means 20 Leds, could this be done with one Psoc chip + some led drivers

That kind of kills the 676. You will need a PIC with 10 ADCs.
If you go with the PIC solution...

[Jerson]

I don't think this is the appropriate forum to discuss the PSoC. However, I am dropping this hint here for any others who may be interested. The forum for Psoc is well supported at psocdeveloper.com

Andy, if you need any more info, PM me and I'll be glad to get you started.