Just remember that if it hasn't got a built-in Diode to protect against back-emf spikes, you must add one otherwise you will run the risk of destroying the PIC pin that the coil is connected to.
|
Just remember that if it hasn't got a built-in Diode to protect against back-emf spikes, you must add one otherwise you will run the risk of destroying the PIC pin that the coil is connected to.
|
For multiple inputs you can look at analog switches (e.g. MAX312 and equivalents). These will require a few additional parts to guarantee the power-up conditions (e.g. pull-ups or pull-downs on control lines).
|
Just found one more solution reading this thread http://www.picbasic.co.uk/forum/show...hlight=jswayze
I put 10k resistor in series with the AD pin and changed the PIC to 12F683 or 16F684 (it doesn’t work with 16HV785).
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks