Zero-crossing detector?

Results 1 to 14 of 14

Threaded View

  1. - 11th August 2009, 14:45 #13
    sougata's Avatar
    sougata
    sougata is offline Contributor
    Join Date
    Feb 2005
    Location
    Kolkata-India
    Posts
    563

    Did you find this post helpful? Yes | No

    Default Phase shifts the zero cross

    Hi,

    The zero-cross sensing is mostly used for phase angle control. The Master The circuit you mentioned would essentially phase shift the zero cross signal.

    BTW if you replace this idea with this idea then you get more ideas. Like this idea

    Thanks to the author of the site and The Master
    Last edited by sougata; - 11th August 2009 at 15:00. Reason: Found out later
    Regards

    Sougata
« Previous Thread | Next Thread »

Similar Threads

  1. interrupt the 240ac power line by using the pin rb0/int(zero crossing detector) of pi
    By texas5 in forum mel PIC BASIC Pro
    Replies: 6
    Last Post: - 10th September 2008, 10:04
  2. Crossing Page Boundary - Solution
    By Darrel Taylor in forum FAQ - Frequently Asked Questions
    Replies: 1
    Last Post: - 24th November 2007, 02:52
  3. IR detector
    By geckogrotto in forum mel PIC BASIC Pro
    Replies: 28
    Last Post: - 30th August 2006, 03:16
  4. Crossing Page Boundary .....
    By turkuaz in forum mel PIC BASIC Pro
    Replies: 3
    Last Post: - 20th March 2006, 07:57
  5. error on compiling
    By parker in forum mel PIC BASIC Pro
    Replies: 0
    Last Post: - 16th June 2005, 14:31

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules