option_reg.7 is just a bit.Code:OPTION_REG.7 = %110110 'pull up actifs
you should do this to activate pull-ups.
and you dont need to use pull-ups for output.Code:OPTION_REG.7 = 0 ; activate pull-ups
|
Option_reg.7
option_reg.7 is just a bit.Code:OPTION_REG.7 = %110110 'pull up actifs
you should do this to activate pull-ups.
and you dont need to use pull-ups for output.Code:OPTION_REG.7 = 0 ; activate pull-ups
Last edited by mehmetOzdemir; - 7th August 2009 at 09:15.
|
Hello
I was STUPID with my option-reg.7 bit !
May be I was swimming in all those bits in all those registers !
I have made some changes, BUT the DUCK is still alive
I have NO signal (digital) on ENAB, DTA and Clk
LED is flashing (at least !)
any ideas ?
thanks
hardware in PDF
CODE in txt
|
Hi Francois,Originally Posted by F1CHF
You built yourself a nice loop there, complete with flashing leds
it goes 2 places, th BOUCLE or INIT, you did not tell it to go anywhere else, if you want it to procede to envoi take out goto init.
If you do not believe in MAGIC, Consider how currency has value simply by printing it, and is then traded for real assets.
.
Gold is the money of kings, silver is the money of gentlemen, barter is the money of peasants - but debt is the money of slaves
.
There simply is no "Happy Spam" If you do it you will disappear from this forum.
|
Thank for your help but you surprise me ..
power on
INIT ...
goto envoi
send data(s) to PLL
goto boucle
if LOCK = 1 goto boucle (LOCK is OK PLL is running)
if not goto INIT
as far as I understand
I will put some pullup to check now ..
it is very strange
Francois
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks