Hello Francois,
To have "all digital" you have the ADCON0 register to deal with, specifically the ADON bit which is ADCON0.0 which must be cleared either by ADCON0 = 0 or ADCON0.0 = 0
Hello Francois,
To have "all digital" you have the ADCON0 register to deal with, specifically the ADON bit which is ADCON0.0 which must be cleared either by ADCON0 = 0 or ADCON0.0 = 0
If you do not believe in MAGIC, Consider how currency has value simply by printing it, and is then traded for real assets.
.
Gold is the money of kings, silver is the money of gentlemen, barter is the money of peasants - but debt is the money of slaves
.
There simply is no "Happy Spam" If you do it you will disappear from this forum.
option_reg.7 is just a bit.Code:OPTION_REG.7 = %110110 'pull up actifs
you should do this to activate pull-ups.
and you dont need to use pull-ups for output.Code:OPTION_REG.7 = 0 ; activate pull-ups
Last edited by mehmetOzdemir; - 7th August 2009 at 09:15.
Hello
I was STUPID with my option-reg.7 bit !
May be I was swimming in all those bits in all those registers !
I have made some changes, BUT the DUCK is still alive
I have NO signal (digital) on ENAB, DTA and Clk
LED is flashing (at least !)
any ideas ?
thanks
hardware in PDF
CODE in txt
If you do not believe in MAGIC, Consider how currency has value simply by printing it, and is then traded for real assets.
.
Gold is the money of kings, silver is the money of gentlemen, barter is the money of peasants - but debt is the money of slaves
.
There simply is no "Happy Spam" If you do it you will disappear from this forum.
Thank for your help but you surprise me ..
power on
INIT ...
goto envoi
send data(s) to PLL
goto boucle
if LOCK = 1 goto boucle (LOCK is OK PLL is running)
if not goto INIT
as far as I understand
I will put some pullup to check now ..
it is very strange
Francois
Bookmarks