16F88 bootlader with Internal OSC

[Darrel Taylor]

Hi Henrik,

Give this a try ...

I've modified the 16F88_04.HEX file to jump to a new location, set OSCCON to $60 (4mhz) then jump back to the bootloader.

I've changed the OSC to INTIO, and used the Serial Number dialog in meProg to modify certain locations of the HEX file with new RAW instructions.
It's kind of like flipping switches on the front panel of an Altair 8080.

I think it will work, but it's a bit of a gamble.

hth,