New to PIC

[Mike2545]

Thanks for the input guys, still no luck with the program, maybe its the Junebug... I don't know. Any other suggestions?

[mackrackit]

If you think it might be the "June bug" try a simple hardware setup with one LED on a non analog pine and see it you can make it blink.

[Mike2545]

I can get the other ports to respond to programming but PORTA.6 and 7 don't do as they should.

[mackrackit]

I can get the other ports to respond to programming but PORTA.6 and 7 don't do as they should.

OK, that rules out the "junebug".

Can you post your current code, configs, and schematic so we can take a look?

[Mike2545]

Here is my code, it flashes leds on PORTA.0 and PORTB.0

ADCON0 = 0
ADCON1= 127
define OSC 4
led var PORTA.0
sink var PORTB.0

loop:
toggle PORTA.6
pause 5
high led
pause 5
low led
pause 5
high sink
pause 5
low sink
goto loop
end


PORTA.6 is just low, it does not toggle or go High if I change the code.

The schematic is simple, I connected VPP, +5, Gnd, PGD and PGC.
I have 470 ohm resistors from the PIC to leds connected to GND.

Could it be the clock output function? How do I set INTRC_OSC_NOCLKOUT?

[mackrackit]

http://www.picbasic.co.uk/forum/showthread.php?t=543
The above talks about how to set the configs.
You can do it in your code or just modify the PICs *.inc file.

[Mike2545]

Well, nothing I have tried with this has worked, I can get it to work in Swordfish Basic but Microcode studio is not what I expected for the Price they charge.

Has anyone else gotten a 18F1320 to work correctly with PICBasic Pro?

I am beginning to regret shelling out good money for a product that does not work as well as a free compiler.