PICBASIC Pro & MPLAB integration syllabus

[chris vp]

Gents

I think we should go on..let us see the brighter side of this forum.

Ill be sharing this one as an example of the resources I found..some sort of an example on this integration. I cant verify its content but like I said this helps me.

I cant understand the language of the site it self but the english write up itself seems the same from the guy I mentioned above from central america has been writing.

Just for reference. Hopefully there are a lot more of this kind of resources out there.

http://www.infohit.si/download/public/pic/pbp/mplab.txt

[chris vp]

@ Mack

Yes Dave....we should give due gratitude to people that help us in anyway. Your a witness on that from the other forum topic...

As to this wish list the perspective is more on commercial side which extends to robustness not only in the setting up of the softwares but to the hardwares as well .Saving aside side comments could have make the discussion less hard & reactive.

As an example: seeing my last response below might give some smile, grin or some sort of expressions in your face.........thats the real experience...that is where I first read that write up.

My deligence few weeks back in searching the net gain some fruit but not knowing I mis it out in the PBP program folder. Often than not... seeing file on the folders under program directory will give you "type=autorun.ico" inside so whom would think its a documentation anyway.

Learning from it thats where I come up to write this wish list in my own commercial perspective.
No intention of making other people look bad.


(ref.C:\PBP\MPLAB.txt as stated by Alain)

[chris vp]

All

Seems PBP 2.6 is out...and the instruction on how to run MPLAB is more straight forward compare to the previous version. I can really appreciate the MELAB move on this.

[mackrackit]

All

Seems PBP 2.6 is out...and the instruction on how to run MPLAB is more straight forward compare to the previous version. I can really appreciate the MELAB move on this.

I do not see it on Melab's web site??? Where is 2.6 hiding?

[ScaleRobotics]

It's kind of hushed while all the vendors get it in stock. But most vendors have it and are shipping it now. I have not seen a revision list. But have heard there is more support for many other PIC USB chips. I had asked a few months ago about support for the PIC18F26j50 family, and I got an email from Jeff at MeLabs that the PIC18F26j50 is now supported by v 2.60. (My v2.60 should get here tomorrow!).

[mackrackit]

Here I have been checking Jeff's site for it, guess I should go to one of the vendors...

But why am I complaining...I still have not figured 2.50 out yet ...

[chris vp]

Gents...maybe by this time you already found the topic in melab site.

for ref: http://www.melabs.com/support/mplab.htm