hello
I have a translation probleme about optional label
on I2C commands ..
explanation given in the help database is :
If the optional Label is included, this label will be jumped to if an
acknowledge is not received from the I2C device.
question :
is it a GOTO or a GOSUB function ?

I have a problem with a SP5055 synthetiser, it is working well
using a I2Cwrite command (output frequency is good)
I try to read the SP5055 to see the value of the Frequency Lock bit
(BIT6 of the register)
As soon as I send I2CREAD either on address @C2 or @C3 the frequency
goes outside the good value ... either down or up !

very strange ...
thanks in advance for your help