RPM With Timer1

[mel4853]

It's still jumbling the main with speed when I hit preview. It all works except the speed routine.

Speed:
wTimer1=0 ' clear Timer1
T1CON.0=1 ' start timer1
pause 1000 ' acquisition time
T1CON.0=0 ' stop timer1
pause 100
return

I call this from a gosub in the main routine. I know it gets here because if I put a number in wtimer1= it will display that number.

[Bruce]

Try placing an LCDOUT just below T1CON.0=0 in your Speed routine to see if it prints
the value in Timer1.

Does it work now?

[mel4853]

Bruce,
Sorry to waste your time. My fault on that one. Forgot one resistor. Everything works just fine now. Thank you for the help!!!!!!!

Mike