|
Hi Alain,
It should be fantastic but I did not succeed.
Please can you give more details about how to proceed ?
Up to now I have done File>Import and then I have selected the hex file related to my project. I only obtain a disassembly listing of the hex file with no symbolic relation with the Basic. Where is the selection for that ?
Mike BZH
PS : Saint-Quentin-en-Yvelines is full of Brittons ! I'm proud to be part of them !
|
How to set Symbolic tab and see disassembled code
MikeBZH,
Once you have imported your hex code file into MPLAB IDE, select View\Program Memory and you will then see a disassembled listing of your code. In this dissassembler window, look down in the lower left of the window and you will see some tabs....one named "Machine" and one named "Symbolic". Make sure you have the Symbolic tab selected and you will then see all of the symbolics with your code. Hope this helps you!
|
Hi Jellis,
Many thanks for you repply. Yes it works !
MikeBZH
Last edited by MikeBZH; - 15th June 2009 at 09:39.
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks