Ds18b20

Closed Thread
Results 1 to 25 of 25

Thread: Ds18b20

Hybrid View

  1. - 14th June 2009, 09:50 #1
    ahmed_salah's Avatar
    ahmed_salah
    ahmed_salah is offline Junior Member
    Join Date
    Aug 2008
    Posts
    31

    Did you find this post helpful? Yes | No

    Default

    hi,
    i try the code u send me but still the same result nochange the resolution still 0.5
  2. - 14th June 2009, 13:01 #2
    Acetronics2's Avatar
    Acetronics2
    Acetronics2 is offline Fanatical Contributor
    Join Date
    May 2004
    Location
    NW France
    Posts
    3,653

    Did you find this post helpful? Yes | No

    Talking

    Hi, Ahmed

    No surprise ... you do not write tte DS Config Word in the right registers ...

    our friend Fratello saw that ( and corrected it ... )

    a pair of zeros is missing in your command line ...

    Alain
    Last edited by Acetronics2; - 14th June 2009 at 13:03.
    ************************************************** ***********************
    Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
    ************************************************** ***********************
    IF there is the word "Problem" in your question ...
    certainly the answer is " RTFM " or " RTFDataSheet " !!!
    *****************************************
  3. - 14th June 2009, 13:35 #3
    ahmed_salah's Avatar
    ahmed_salah
    ahmed_salah is offline Junior Member
    Join Date
    Aug 2008
    Posts
    31

    Did you find this post helpful? Yes | No

    Default

    hi,
    still the same resolution 0.5 even after i update the code , attached is the code u send me if u want to check
    Attached Files Attached Files
  4. - 14th June 2009, 14:24 #4
    Acetronics2's Avatar
    Acetronics2
    Acetronics2 is offline Fanatical Contributor
    Join Date
    May 2004
    Location
    NW France
    Posts
    3,653

    Did you find this post helpful? Yes | No

    Question Where's the bug ???

    Hi, Ahmed

    I must admit Fratello's program only shows half degrees ... ( just tested on an EasyPic 5 )

    but still have not found Why !!!

    Alain
    ************************************************** ***********************
    Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
    ************************************************** ***********************
    IF there is the word "Problem" in your question ...
    certainly the answer is " RTFM " or " RTFDataSheet " !!!
    *****************************************
  5. - 14th June 2009, 14:32 #5
    ahmed_salah's Avatar
    ahmed_salah
    ahmed_salah is offline Junior Member
    Join Date
    Aug 2008
    Posts
    31

    Did you find this post helpful? Yes | No

    Default

    hi,
    i am using pic basic pro 2.44 do u think this the problem
  6. - 14th June 2009, 15:00 #6
    Acetronics2's Avatar
    Acetronics2
    Acetronics2 is offline Fanatical Contributor
    Join Date
    May 2004
    Location
    NW France
    Posts
    3,653

    Did you find this post helpful? Yes | No

    Wink

    Hi, Ahmed

    I Finally got it !!!

    the problem is in the Waiting loop ... that doesn't wait !!!

    sooo... add :

    Code:
     Busy VAR BIT
    at the top of the program

    and change :

    Code:
    WaitLoop:
 
' While not DQ                      ' NOT Working !!!
' Wend
    by

    Code:
    WaitLoop:

OWIn DQ, 4, [Busy] 			' Check for still busy converting

'PORTC.4 = 1				' Show waiting for conv complete

If Busy = 0 Then 

 GOTO waitloop
 
ENDIF

' PORTC.4 = 0
    Port C.4 was chosen to show the time the DS is Busy ... very useful tool to verify conversion is really complete !!!

    Have fun,

    Alain
    ************************************************** ***********************
    Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
    ************************************************** ***********************
    IF there is the word "Problem" in your question ...
    certainly the answer is " RTFM " or " RTFDataSheet " !!!
    *****************************************
  7. - 14th June 2009, 15:21 #7
    ahmed_salah's Avatar
    ahmed_salah
    ahmed_salah is offline Junior Member
    Join Date
    Aug 2008
    Posts
    31

    Did you find this post helpful? Yes | No

    Default

    hi,
    so thanks for help now i got resolution 1/100 i am so happy but i want to underestand what no 4 in statement OWIn DQ, 4, [Busy] means ???
    i have another question i want to read the o/p to pc serial port i connect 1k resistance to portb.1 and send it to pc rx pin (2) and circuit ground to pc gnd pin (5)
    note : i am using usb to serial converter
    i update the program just for testing to send a message but i notice that the Rx led on usb to serial converter flashes and nothing out on hyberterminal ????
    attached is code
    Attached Files Attached Files
« Previous Thread | Next Thread »

Similar Threads

  1. Reading temperature using multi DS18B20
    By KVLV in forum Code Examples
    Replies: 16
    Last Post: - 3rd November 2017, 19:48
  2. Please help with code for DS18B20
    By fratello in forum mel PIC BASIC Pro
    Replies: 109
    Last Post: - 28th April 2013, 21:12
  3. Help with DS18B20 program
    By presario1425 in forum mel PIC BASIC Pro
    Replies: 38
    Last Post: - 22nd August 2012, 00:50
  4. Multi DS18b20 Code help.
    By sccsltd in forum mel PIC BASIC Pro
    Replies: 2
    Last Post: - 18th December 2009, 06:13
  5. DS18B20 error reading
    By Gaetano in forum mel PIC BASIC Pro
    Replies: 0
    Last Post: - 29th August 2007, 16:21

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules