neebee wants to know pullup or pulldown?

[tenaja]

Use portb and you can use the internal pullups.
It really only matters if you are using the pins for multiple functions.

[bogdan]

http://www.piclist.com/techref/logic/xtrapins.htm

[lecoind]

ok Tenaja, I understand the internal pullups but what I realy want to know is if you were designing a circuit with switches controlling inputs, would you use
a 1 to trigger the input or a 0 to trigger the input. I can design it eather way. I have had some people say keep all inputs (pulldown) normaly to ground until you trigger with a +5v and then some say always have a +5v pullup and ground the pin to trigger. Which is the prefered method?

[lecoind]

Bodgan, that was a great link. That relay let me know about pullups and pulldowns. Thanks

[mackrackit]

Which is the prefered method?

It all depends on the external hardware. That is what will determine the method.

Is the switch normally high or low? Is the switch normally closed or open? That is the beauty of it, flexible.

Unused pins can be pulled low with a 10K or higher.