Please send me a SMS program

[hjcool]

Can anyone tell me how to send a SMS using GSM Module via PIC microcontroller (16F877A).

I build up a circuit to get the weight of the animal in to microcontroller. But due to my poor knowledge on Microcontroller + GSM modem interfacing I unable to send message via GSM Modem. But I know how to send SMS via Computer. I have some knowledge on PIC Microcontroller and PicBasic language. Can you please send me a working routing to send a SMS using Microcontroller and a schematic. It will be more helpful if you could send it related to PICBasic.

My SMS Code,

Start:

Pause 1000
SerOut PORTB.3,T9600, ["AT+CMGS=",34,"MyNumber",34,13]
Pause 1000
SerOut PORTB.3,T9600, ["TEST",13]
Pause 1000
SerOut PORTB.3,T9600, [26]

Goto Start

[xxxxxx]

http://picbasic.co.uk/forum/showthread.php?t=10757 here you could find a fine example of sending and reciving sms via pic16F887

[hjcool]

Please someone tell me the possible errors of my given code

[Ioannis]

Have you checked the link xxxxxx gave to you?

There is already a ew post. Read it.

As always, USART is your best friend in communications and always wait for the device to answer (either OK or some error message).

Pause is not enough...

Ioannis

[hjcool]

I am just a beginner to this GSM communication field and I studied agriculture engineering for my BSc. I self studied these things, and that’s why I am asking this kind of stupid questions. I’ll try with the codes given by XXXX. I need your future help in this regards.
Thank You

[hjcool]

Can anyone tell me, what are the hardware Serial port pins on 16F877A.

[Jumper]

I suggest you start your project with downloading the datasheet for the 16F877A and read it. You dont have to understand more of the datasheet than to remember that you have seen something about this and that and then you look that section up.

Do you have a /P or /PT package? One is a 40-pin DIP, the other a 44-pin TQFP (surface mounted). Before we know this we dont know what pis it is :-)

[hjcool]

thanks i Read it