DT_INTS-14 /interrupts enable bits / flag bits


Closed Thread
Results 1 to 3 of 3
  1. #1
    Join Date
    Jan 2009
    Posts
    78

    Default DT_INTS-14 / interrupts enable bits / flag bits

    In order to use the DT_INTS-14 i have to set the interrupt enable bit (INTCON, PIE1 and PIE2 registers) and to take care of the interrupt flags (INTCON, PIR1 and PIR2 registers) ???? ... or DT took care of that ?

    Best Regards,
    Bogdan
    Last edited by bogdan; - 16th May 2009 at 16:54.

  2. #2
    Join Date
    Jul 2003
    Posts
    2,405


    Did you find this post helpful? Yes | No

    Default

    DT_INTS takes care of everything for you automatically.
    Regards,

    -Bruce
    tech at rentron.com
    http://www.rentron.com

  3. #3
    Join Date
    Jan 2009
    Posts
    78


    Did you find this post helpful? Yes | No

    Default

    Thank You Bruce

Similar Threads

  1. Bits, Bytes Words and Arrays
    By Melanie in forum FAQ - Frequently Asked Questions
    Replies: 24
    Last Post: - 14th June 2016, 08:55
  2. pic to pic ir link versus wired link : help please anyone
    By xnihilo in forum mel PIC BASIC Pro
    Replies: 13
    Last Post: - 30th May 2008, 22:01
  3. Sleep Mode
    By Pesticida in forum mel PIC BASIC Pro
    Replies: 7
    Last Post: - 13th March 2008, 11:31
  4. error on compiling
    By parker in forum mel PIC BASIC Pro
    Replies: 0
    Last Post: - 16th June 2005, 15:31
  5. USART interrupt not interrupting right
    By Morpheus in forum mel PIC BASIC Pro
    Replies: 12
    Last Post: - 6th March 2005, 02:07

Members who have read this thread : 0

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts