I used the 1.0µF and 0.01µF as well as the 470pF capacitor values shown in Figure 3 (Page 5) of the datasheet and the output was clean. Before adding them the output was wildly erratic. In my case, I used SMD ceramic caps.
|
I used the 1.0µF and 0.01µF as well as the 470pF capacitor values shown in Figure 3 (Page 5) of the datasheet and the output was clean. Before adding them the output was wildly erratic. In my case, I used SMD ceramic caps.
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks