MPXA4115A picbasic code

Closed Thread
Results 1 to 40 of 104

Hybrid View

  1. - 15th May 2009, 17:04 #1
    iw2fvo's Avatar
    iw2fvo
    iw2fvo is offline Member
    Join Date
    Jun 2008
    Location
    Varese , Italy
    Posts
    326

    Did you find this post helpful? Yes | No

    Default

    Thanks,
    any suggestion for a practical good decoupling of the power supply based on your experience ?
    Thanks
    Ambrogio
  2. - 15th May 2009, 18:30 #2
    dhouston's Avatar
    dhouston
    dhouston is offline Prolific Poster
    Join Date
    Dec 2005
    Posts
    1,073

    Did you find this post helpful? Yes | No

    Default

    I used the 1.0µF and 0.01µF as well as the 470pF capacitor values shown in Figure 3 (Page 5) of the datasheet and the output was clean. Before adding them the output was wildly erratic. In my case, I used SMD ceramic caps.
    www.davehouston.net
« Previous Thread | Next Thread »

Similar Threads

  1. sample code for AT45DB642D in Picbasic Pro
    By itsssyam in forum General
    Replies: 0
    Last Post: - 10th March 2010, 07:01
  2. 16f887 44 pin demo board code problem?
    By jessey in forum mel PIC BASIC Pro
    Replies: 9
    Last Post: - 7th December 2008, 15:17
  3. How to configure SPI in PICBASIC PRO?
    By moogle in forum mel PIC BASIC Pro
    Replies: 13
    Last Post: - 15th April 2007, 19:31
  4. PicBasic code problems with a 16F84A
    By Lauren Barta in forum mel PIC BASIC
    Replies: 3
    Last Post: - 30th May 2006, 23:50
  5. PicBasic Fundamentals
    By Billyc in forum General
    Replies: 9
    Last Post: - 4th May 2004, 11:04

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules