Still no improvements, no HEX file is being created and the reset button is still not functional.
EDIT: Problem solved.
|
Still no improvements, no HEX file is being created and the reset button is still not functional.
EDIT: Problem solved.
Last edited by Teknikum; - 14th May 2009 at 13:06.
|
Hi, Teknikum
Looks strange ... Which is your PBP release ???
By the time, I Turned to MCS + ... compile still Ok, download to my programmer Ok too ...
So :
1) There's no reason for MCS not to create the Hex file ...
except you try to use MPASM and you didn't install MPLAB on your computer. ( cf Joe's answer )
Check: View\ Compile and Program Options\Assembler and verify " use MPASM " is NOT selected.
OR PM Assembler could have been damaged ( ??? ) in the PBP folder ...
Re-install your FULL PBP program, then ...
2) The " reset " button do not belong to MCS ... if there's no Hex file to program, nor hex file in your processor, the " reset " can't show anything visible ...
Now, I Can't help you further ...
Alain
Last edited by Acetronics2; - 14th May 2009 at 13:18. Reason: Arrrghhhh, ons second later : which was the problem ???
************************************************** ***********************
Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
************************************************** ***********************
IF there is the word "Problem" in your question ...
certainly the answer is " RTFM " or " RTFDataSheet " !!!
*****************************************
|
setting up the software
http://narobo.com/articles/PICBASIC.html
...i`m hope will help
|
Thanks for the help, we have worked it all out now.
By the way, this is a school-account that is made with permission from the teacher since he is worse than we are, we are several students using it so don't get confused if something else comes up.
Thanks
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks