Compiler not creating .hex files for programmer.

[Acetronics2]

Hi,

:020000040000FA
:04000000B201DA2847
:080008000408A700891009108B
:10001000091083168910091009100F308805831202
:100020002708B21830283A30A100FC30A020333025
:10003000A60044201030A1006830A0204420643085
:100040009F202230A600442028302F200C302F2063
:1000500001302F2006302F20B21427083028321408
:10006000A600321C3E280910033C031C43284320F1
:100070000530A100DC30A020031408003214FE3C3F
:100080000319D5280914321C321089140F30880541
:100090002608F03988048910A60E321844282C301E
:1000A0009F2003140800B31329080319B317053060
:1000B000A8002730A300103069200330A300E830E7
:1000C0006920A30164306920A3010A306920240853
:1000D0007028A2002508A1002408A000B420200850
:1000E000A000A8030319B313290803197A282802CA
:1000F000031808002008031DB313B31B0800303E8B
:10010000D028A000A00DA00D200D3839C1389F00C7
:100110000030A1003230A0201F151F198D28A10129
:100120001E08D528A301A200FF30A207031CA307C5
:10013000031CD5280330A100DF30A0209428A101A2
:10014000E83EA000A109FC30031CA928A007031861
:10015000A628A0076400A10FA6282018AF28A01C7D
:10016000B3280000B3280800A501A4011030A600A0
:10017000210DA40DA50D2208A4022308031C230FA2
:10018000A5020318CA282208A40723080318230F6E
:10019000A5070310A00DA10DA60BB8282008D5288F
:1001A000840031088A00300882008313031383120D
:1001B00064000800831602309F0083120911831621
:1001C000091183120130A300F4308A01932000301A
:1001D0008A018120B800FE308A01052001308A01A1
:1001E000052056308A01052061308A0105206C30D7
:1001F0008A01052075308A01052065308A010520B5
:100200003A308A010520A9013808A400A50104306C
:10021000B000B1018A0153200130A300F4308A01FB
:08022000932063008A011129FB
:00000001FF

so ... it compiles as-is !!! just striking the " compile " button ...

Could you explain what do you want to do and What you do ???

Now, I do not tell you some small things are missing ... but there is no compiling problem ...

Alain

[Teknikum]

It doesn't matter what code I want to compile, I know that my code is 100% correct because we learn directly from the book and we have written about 14 programs that worked before.
But now when we wanted to compile with the MicroCode Studio Plus, it stopped to create .hex-files. Without the .hex files we can't use the Melabs programmer and if we use Microcode Studio Plus as a programmer, the processor won't be able to reset with the resetbutton, that's also one problem.
We checked some other lab-chipsets, we checked voltage and other stuff, but it's all new stuff so..
For example, one program is called "4.1"
These files are saved when I compile it:

4.1.pbp
4.1.asm
4.1.mac
4.1.sym
4.1.lst
4.1.map

but no .hex!

I'm sorry if I can't explain very good, I'm new at this.
Thanks

[Acetronics2]

Hi,

In a first time, to get something usable, you could use MPLAB to generate the Hex file, and then use your programmer alone.

Sure, First thing I would do is re-install Microcode ...

BTW: do You get any Error or Warning messages at compile time ???

Alain

[Archangel]

Sure, First thing I would do is re-install Microcode ...
Alain

Only way I can see that happening is if MCS is set to use MPASM and there is no (working) mpasm of if the path to mpasm is incorrect. So as Alain said . . . or reinstall mpasm.
Oh, and not to forget my manners . . . again . . . Welcome to the forum.

[Teknikum]

Thanks a lot!
I'm going to look into the things you suggested and I noticed some progress already.
I'll return if something bad comes up.

Thank you so much for the good attitude!

[Teknikum]

Still no improvements, no HEX file is being created and the reset button is still not functional.



EDIT: Problem solved.

[Acetronics2]

Hi, Teknikum

Looks strange ... Which is your PBP release ???

By the time, I Turned to MCS + ... compile still Ok, download to my programmer Ok too ...

So :

1) There's no reason for MCS not to create the Hex file ...

except you try to use MPASM and you didn't install MPLAB on your computer. ( cf Joe's answer )


Check: View\ Compile and Program Options\Assembler and verify " use MPASM " is NOT selected.


OR PM Assembler could have been damaged ( ??? ) in the PBP folder ...

Re-install your FULL PBP program, then ...



2) The " reset " button do not belong to MCS ... if there's no Hex file to program, nor hex file in your processor, the " reset " can't show anything visible ...

Now, I Can't help you further ...

Alain