Hi, Teknikum
Looks strange ... Which is your PBP release ???
By the time, I Turned to MCS + ... compile still Ok, download to my programmer Ok too ...
So :
1) There's no reason for MCS not to create the Hex file ...
except you try to use MPASM and you didn't install MPLAB on your computer. ( cf Joe's answer )
Check: View\ Compile and Program Options\Assembler and verify " use MPASM " is NOT selected.
OR PM Assembler could have been damaged ( ??? ) in the PBP folder ...
Re-install your FULL PBP program, then ...
2) The " reset " button do not belong to MCS ... if there's no Hex file to program, nor hex file in your processor, the " reset " can't show anything visible ...
Now, I Can't help you further ...
Alain
Last edited by Acetronics2; - 14th May 2009 at 13:18.
Reason: Arrrghhhh, ons second later : which was the problem ???
************************************************** ***********************
Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
************************************************** ***********************
IF there is the word "Problem" in your question ...
certainly the answer is " RTFM " or " RTFDataSheet " !!!
*****************************************
Bookmarks