I'm using 2 Pics a transmitter/receiver to send data. Pic 1 is the 16F877 for TX and Pic 2 is the 16F876 for the RX. The Linx modules are TXM-916-ES and RXM-916-ES.

I have tried serout and serin but just receive junk. I have a scope probe on the data lines for both the TX and Rx. I do see the same data on both channels. I know the data is being transmitted and received but I cannot get this data into the pic.

If anyone has used the Pic with the Linx modules before any help would be great.

Thanks