16c63a help

[andrewwaack]

i am tring to load a prog in to a 16c63a
the loader i use is a velleman p8048
the software i use to program is picprog2
the prob is tyhat picprog2 dose not support the 16c63a
can any one help



thanks
andrew

[Darrel Taylor]

... picprog2 dose not support the 16c63a
can any one help

Um, Buy a real programmer!
PICkit3 is out now. Less than $50.

Velleman makes cheap DIY kits.
Can't expect more than a cheap programmer that works with what they sell from them.
<br>

[Tom@Nottingham]

Hi
I have Velleman 8076 programmer and solved similar problem by going to
www.ic-prog.com, Your ic is listed, set to jdm programmer and it should work?

Tom

[mister_e]

I wouldn't suggest PICKIT 3 for now but PICKIT 2.

From what i saw on Microchip forum, PICKIT 3 still seems to have few problem, some previous PICKIT 2 user really don't like it for various reasons, and most feature of PICKIT 2 are not include in yet.

PICKIT 2 (PG164120) is listed at 35$

The main problem with PICKIT 2 here? Doesn't support the 16C63A,

Not sure for PICKIT 3, they don't have a support list, and I haven't installed it in my MPLAB version.

So yeah Ic-Prog could probably help, if any JDM software work... well choice is your, check for Winpic800.
http://www.winpic800.com//index.php?...d=23&Itemid=89