Quote Originally Posted by Meriachee View Post
The little servo I am using is moving the arm when the power comes up in a rather uncontrollable fashion, until the pic is operational. With the linkage I am using, eventually it will cause some issues.
Hi, Dave

You CAN'T have your servo, if an "analogic" one, steady while powering on its amplifier ... that's it !!!

The only way is to cut the power to the motor terminals ( relay ...)

Solution is to use a DIGITAL servo which control circuitry won't drive the motor at Power-up.

No simple solution for "old analogic" servos ...

Alain