Servo and pwm


Closed Thread
Results 1 to 11 of 11

Thread: Servo and pwm

Hybrid View

  1. #1
    Join Date
    Jul 2003
    Posts
    2,405


    Did you find this post helpful? Yes | No

    Default

    Hi Gary,

    I had one of those micro servos a few years back that did pretty much the same thing.

    It had a severe twitch under certain circumstances too as I recall. Can't remember exactly
    why, but it was a funky servo. I think it was a BlueBird brand? Can't remember. I blew it up
    goofing around, and never bothered replacing it.
    Regards,

    -Bruce
    tech at rentron.com
    http://www.rentron.com

  2. #2
    Join Date
    Oct 2008
    Posts
    51


    Did you find this post helpful? Yes | No

    Default

    Its down to the indidual servo buddy, the experiances i have had is the nice and cheap servos have alot of start up movement.... I got a cheap load of servos from ebay and they all have this problem. I also have another servo which i got from a friend at work which is of a higher wuality that doesnt have the issue

Similar Threads

  1. PMDC SERVO MOTOR WITH quadrature encoder DRIVE ?
    By phoenix_1 in forum Schematics
    Replies: 37
    Last Post: - 22nd November 2009, 19:45
  2. The best way to control a servo with a PIC
    By The Master in forum Off Topic
    Replies: 41
    Last Post: - 19th October 2008, 02:44
  3. how to change servo motor PWM
    By dboy in forum mel PIC BASIC Pro
    Replies: 15
    Last Post: - 21st September 2008, 07:02
  4. RC Servo Receiver
    By Ioannis in forum General
    Replies: 2
    Last Post: - 23rd October 2007, 06:56
  5. inturrepts to control the servo motor position!
    By parinshah in forum mel PIC BASIC Pro
    Replies: 0
    Last Post: - 2nd May 2006, 07:55

Members who have read this thread : 1

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts