Utility of 0,1µF capa when batteries are used

Results 1 to 6 of 6

Threaded View

  1. - 26th April 2009, 13:20 #2
    Acetronics2's Avatar
    Acetronics2
    Acetronics2 is offline Fanatical Contributor
    Join Date
    May 2004
    Location
    NW France
    Posts
    3,653

    Did you find this post helpful? Yes | No

    Talking

    Hi, Roger

    Why do you always want to rebuild the world ???

    Just take a scoping of the supply lines on the PIC pins ... and watch the difference ...

    In certain configs no cap doesn't really matter ... in others you can't do anyting with your PIC. Batteries or not batteries.

    ( I MEASURED a half full 4 Sanyo 2100 mAh NiMh AA cells batt @ 0.45 Ohm internal resistance ... 78L05 does much better !!! )

    If you need ONE good reason ... consider RFI generating on supply lines AND RF Generation.

    Alain
    Last edited by Acetronics2; - 26th April 2009 at 13:22.
    ************************************************** ***********************
    Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
    ************************************************** ***********************
    IF there is the word "Problem" in your question ...
    certainly the answer is " RTFM " or " RTFDataSheet " !!!
    *****************************************
« Previous Thread | Next Thread »

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules