Oh BTW, 16F627 is not supported by PICKIT 2 in MPLAB (8.30 here) but only in PICKIT 2 standalone application.
16F627A is supported in MPLAB & in the standalone application.
|
Oh BTW, 16F627 is not supported by PICKIT 2 in MPLAB (8.30 here) but only in PICKIT 2 standalone application.
16F627A is supported in MPLAB & in the standalone application.
Steve
It's not a bug, it's a random feature.
There's no problem, only learning opportunities.
|
Thanks for your interest.
If you says that 16F627 isn't supported by PICKIT 2 in MPLAB. And that seems to be right to me. So, how do I can program this pic. You say that you use HI-TECH C, where do I get that software?
I think I will need a different bootloader than that I used with for CCS...
Sorry, i'm a bit without any direction to go on...
|
Download the latest MPLAB version on Microchip website, and install Hi-Tech C pro, in Lite mode.
http://www.microchip.com/stellent/id...&part=SW007002
OR go on Hi-Tech website, and download it from there
http://www.htsoft.com/microchip/downloads/demos.php
Here's the link for Hi-Tech compiler forum
http://forum.htsoft.com/all/ubbthreads.php
If you really have the ol' version of 16F627, you generate the .HEX files in MPLAB (when you compie your code, then import it in the PICKIT 2 standalone application, then program your PIC from there.
Steve
It's not a bug, it's a random feature.
There's no problem, only learning opportunities.
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks