Change is bad


Closed Thread
Results 1 to 40 of 46

Thread: Change is bad

Hybrid View

  1. #1
    Join Date
    Jan 2009
    Location
    California, USA
    Posts
    323


    Did you find this post helpful? Yes | No

    Default

    Quote Originally Posted by lester View Post
    It would seem that users are:
    • not bothered by the changes
    • cant be bothered to make comment on the chnages (in which case i suggest that there not that bothered)
    • cant actually cope with the changes and so cant post a response
    It would seem that "Have not noticed any difference" should be added to the list.

    I did like mister_e and posted a photo to the test area, but nobody asked me for any "authorization" to do it.

    Perhaps it only targets certain browsers (firefox here), or certain IP addresses, or..?



    steve

  2. #2
    Join Date
    Feb 2009
    Location
    Southern California
    Posts
    86


    Did you find this post helpful? Yes | No

    Red face Change is bad until they change it again

    They must have changed things around again, because I had to enter in the security code for a while each time I posted a reply or even to do a search of the forum, but now it is gone. I incorrectly entered the code 3 or 4 times for a single post as I couldn't read them correctly. Hopefully they found an easier way to get the security they wanted.

    David

  3. #3
    Join Date
    Feb 2009
    Location
    Southern California
    Posts
    86


    Did you find this post helpful? Yes | No

    Default

    i forgot to add, that I'm on Firefox 2.0

  4. #4
    Join Date
    May 2004
    Location
    NW France
    Posts
    3,653


    Did you find this post helpful? Yes | No

    Talking

    Ha, ha

    so, we can see those who are following ... lol.

    The filter has not being left active long enough for a significant majority to have been trying it ...

    Alain
    ************************************************** ***********************
    Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
    ************************************************** ***********************
    IF there is the word "Problem" in your question ...
    certainly the answer is " RTFM " or " RTFDataSheet " !!!
    *****************************************

  5. #5
    Join Date
    Jul 2003
    Location
    Colorado Springs
    Posts
    4,959


    Did you find this post helpful? Yes | No

    Default

    "The squeaky wheel gets the grease."

    And this attempt caused a lot of squeaking. From all forums.
    So Lester removed it.

    As a side note, the low life's automated programs still got thru while captcha was enabled.

    Those dirty RATs.
    DT

  6. #6
    Join Date
    Apr 2003
    Location
    Cambridge - UK
    Posts
    1,046


    Did you find this post helpful? Yes | No

    Default

    ok to avoid issues with those that are colour blind and those that cannot determine lower case from upper case

    i've enabled a simple question and answer test .

  7. #7
    Phil's Avatar
    Phil Guest


    Did you find this post helpful? Yes | No

    Default spell Tesla

    short stupid question.

    is it too difficult or confusing

  8. #8
    Join Date
    Jul 2003
    Location
    Colorado Springs
    Posts
    4,959


    Did you find this post helpful? Yes | No

    Default

    Quote Originally Posted by lester View Post
    ok to avoid issues with those that are colour blind and those that cannot determine lower case from upper case

    i've enabled a simple question and answer test .
    WOW!

    Unless Melanie got to them first ...
    An entire 24 hour period without any SPAM to delete.

    Oh No ... I'm Obsolete
    DT

Similar Threads

  1. A Simple IOC Routine (Interrupt On Change)
    By lugo.p in forum mel PIC BASIC Pro
    Replies: 6
    Last Post: - 8th March 2010, 20:53
  2. encoder port change
    By l_gaminde in forum mel PIC BASIC Pro
    Replies: 5
    Last Post: - 18th September 2009, 20:41
  3. pic18f4520 baud rate change to 115200
    By caltex88 in forum mel PIC BASIC Pro
    Replies: 3
    Last Post: - 30th September 2007, 09:41
  4. HELP !!! How change the voltage of a pin ????
    By stormdacta in forum mel PIC BASIC Pro
    Replies: 6
    Last Post: - 21st August 2007, 21:55
  5. help!! With Keypad change
    By clare1 in forum mel PIC BASIC Pro
    Replies: 3
    Last Post: - 12th December 2006, 22:13

Members who have read this thread : 0

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts