Counter pic16f84

[miro245]

Hello all !!!
I am new in programming,but in this moment I need help.I want make interface with pic16f84 for 8 electro mechanical counters.In main,I needs send decimal number with rs232 to PIC,and in one of them out pin,electromechanical counter must count impulses in value of sending of my PC.(for examples,I sent decimal value 10,and one counters must count 10 impulses).Is it possible and I need help.
Yhank you for all
Miro245

[mister_e]

What kind of mechanical counter are we talking about here?

[miro245]

HI !!!
I use electromechanical counter,and he works with 12V DC.Also I use IC driver ULN2804.Eny pinout and counter works diferents than other (If first count 10 impulses,second or ... count another number of impulses.I need help with this problem.
Best regards
Miro245

[mister_e]

I meant the part # of, this could help to find the datasheet...

[HYETİK]

more information we need pls. add more explanation,

I think pulsein command acn help you, try it or explain it completely

[miro245]

HII !!!
Look,my friend.I need make next :
I must have interface with PIC16F84,and also he must connect with my PC.With any terminal program,I need to send decimal number,like 10 or 15 etc. to interface.With interface,I need 8 electrome chanical counters (he works with 12 V DC).For Examples:If I send A10 or another number,PIC must count with first counter 10 impulses.Or If I sent H10, eight counter must count 10 impulses.The A...,B...,C...,D...,E...,F...,G... anh H... is name of counter or his address.
That is my problems and I must find solution for this interface.
Thank you for any help
Best reguards
Miro245