help getting started with DT_INTS-14

[mister_e]

Without seeing any part of your code it's pretty hard to tell...

[E Kizer]

HI mister E, I just wanted to tell you that your posts have been so helpful to me. I've learned so many really neat things from looking at your codes. But I have to tell you that my absolute favorite was when you used @nop in a loop. I puzzled over that one for a bit until I googled it. I love do nothing on a sunny day and now I can say I love to do nop on a sunny day.

Anyway, what happened was I first got the wsave2, wsave3 errors. A search on the forum said to rem those out.

So either I remed those plus wsave1 or I didn't use a semi-colon, not sure which, but starting over from scratch with a new DT_INTS-14 file and dealing with each error as it came up, again, brought success.

As far as posting code for this particular problem, I was using the blinky led from DT's page, I don't think it would matter too much what code is used, but for us newbie's out there the important thing is to start over, check your errors and corrections and don't over-correct and turn off things that you need.