Audio sounds

[Christopher4187]

Ok, so I got an op-amp and tried it. It pretty much worked like crap. I re-checked all of my connections and they looked good but still nothing.

So, I took out a 16F676 and when I use the "freqout" command along with a 20MhZ resonator, it worked really good. Then I fed the output to a PNP transistor and it was even louder so I think I will most likely use that approach.

Here is my dilemma. I took a speaker from one of those Motorola talkabout FRS radios. I want to buy about 10 of those speakers but there are no markings on it. Does anyone know what kind of speaker I should look for? 4ohm, 8ohm....frequency range....power rating?

Thanks in advance for the help.

Chris

[mister_e]

I don't think those Motorola ones are fancy, so probably anything in a local overstock place would do.

[Normnet]

If you are using a PIC see PIC iPod wav player

CD mono quality of wav files for voice or sound.
May be more than you require though.

Other compiler.


Norm

[Christopher4187]

May be more than you require though.
Norm

Yeah, it's much more then I need and way above my level of expertise. However, I may be able to use that audio chip and I will check it out to see how it works. Also, your speaker (LS1), do you have a part number for that?

Thanks,

Chris

[Normnet]

I may be able to use that audio chip and I will check it out to see how it works.

I think mister_e also once recommended an audio amp but I didn't catch it at the time.
Defiantly better than the LM386.

speaker (LS1), do you have a part number for that?

No part number.
Mainly separate front from back with either an enclosure or a front panel.
I used car speakers for quality but any speaker will output sound.

Someday I will post a basic version of PIC iPod wav player.


Norm