Custom array of pins

[Archangel]

Hello,

I'm hoping someone can point me in the right direction, I want to create an array of pins something like what is shown below, but I haven't found a way yet. Thanks in advance guys.

myvar[0] = portb.2
myvar[1] = portc.1
myvar[2] = portc.5

Hi bgmagistro,
I would submit, that you have !

MyPort var byte     'your new ports name
myport.0 = portB.0  'seg. A
Myport.1 = PortA.0  'seg. B
Myport.2 = PortB.1  'seg. C
Myport.3 = PortB.2  'seg. D
MyPort.4 = PortA.1  'seg. E
Myport.5 = PortA.2  'seg. F
MyPort.6 = PortB.3  'seg. G
MyPort.7 = PortB.4  'dec point
num   var byte      'where your display pattern gets put
index var byte      'where your number originates
lookup2 index,[%11111000, %01100000,%11011010],myport    ' just 0,1,2 in this short table
'myport = num        'display pattern loads into ports for display
                    'you may eliminate the last statement, put myport instead of num
main: 'do something here