Blinking an led problem on P16F84
I am working on P16F84. I want to blink an led. I have a problem.
1. After having all the connection,the voltage at the output port of P16F84 is 0.5V and when the led is connected, the voltage drops to 0V. I am confusing that why the voltage drops even the voltage supplied at the VDD is 5V and MCLR pin is connected to 5V.
Regards
|
Most likely you forgot to initialize the TRIS registers and the ports are in a high impedance mode. Put this into your code and post your code if it still does not work.
I did that myself last weekCode:TRISA = %00000000 ' make all ports outputs TRISB = %00000000 ' make all ports outputs
If you do not believe in MAGIC, Consider how currency has value simply by printing it, and is then traded for real assets.
.
Gold is the money of kings, silver is the money of gentlemen, barter is the money of peasants - but debt is the money of slaves
.
There simply is no "Happy Spam" If you do it you will disappear from this forum.
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks