|
Yes, the PIC16F726 with a capacitive sensing module sounds like the best option.
What I meant by grounded is that in all the touch-button circuits I've tried they would only work if with one hand you touch the circuit's ground (negative lead of the power supply part of the circuit) and with your other hand you touch the touch-button or metal pad. It's like your body acting like a capacitor.
Robert
|
No, there should be no need for any part of your body to be grounded or connected to circuit Vss or any of that. You should be able to just walk up to it on insulated feet and poke it with one finger, just like a "real button".
My buttons have a ground ring *around* them also, which helps a lot I think.
|
FWIW, here's photos of my "test bed" for the touch sensors. On the front you can see it's just a plastic box. The black dots are at the centers of the touch pads. I'll come up with some nice stick on labels for the buttons later.
On the back you can see the six touch sensors... just little squares of sticky backed copper tape with a wire on each one. Just temporary to learn how it all works. The glue isn't all that good so I'll need something more permanent later.
Around the pads, you see the "ground ring" that surrounds it all. it's connected to system ground (Vss) and helps limit the range of the sensor so it doesn't overlap others nearby, and also seems to make individual pads more sensitive.
Dunno if that helps in your quest for a cheap touch sensor, but my tests so far with the 16F727 are good. A finger touch on any of the six sensor pads activates my routines real nice.
I like 'em a lot so far!
steve
|
Wow, I'm impressed with your project Byte_Butcher.
The ground around the pads prevents overlapping false alarms but also decreases sensitivity according to the next paper.
http://ww1.microchip.com/downloads/e...tes/01102a.pdf
There might be a tradeoff in there. Anyway, good job!!!!
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks