Hi . I don't kown PIC18F2423.But when I use PIC18F2523,I make a mistack beacuse of not read it's datasheet carefully .Maybe you need alos read PIC18F2423 's datasheet .good luck.
|
Hi . I don't kown PIC18F2423.But when I use PIC18F2523,I make a mistack beacuse of not read it's datasheet carefully .Maybe you need alos read PIC18F2423 's datasheet .good luck.
|
Take a look at this example
http://www.rentron.com/PICX2.htm
Or use the ADCIN command built into PBP, looks like you are mixing both ways.
Dave
Always wear safety glasses while programming.
|
Change ADCON2 to use more Acquisition time,
Wait after switching the ADC on (ADCON0) 1
delete this ADC-defines !
maybe ... ad a 1nF C to AN1 against ground
PBP 2.50C, MCS+ 3.0.0.5, MPLAB 8, MPASM 5.14, ASIX Presto, PoScope, mE mikroBasic V7.2, PICKIT2
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks