16F84/16F628 and Manchester

[Ioannis]

I cannot see how these two pieces of code (tx and rx) can work together.

Read your code again,or post the working code.

Or try the untested one that is attached.

Rename to .bas and burn it.

Ioannis

[Navaidstech]

Of course!

I'm sending the preamble at a wrong baud rate! DOH!

Changed it and it works ok now....

thanks!!!

Alex

[Navaidstech]

Ioannis...

looks like I jumped the gun there. Your code seems to be working much better than the one I used.

Thank you for your help. Hopefully I'll be ok from hereon.

Alex

[Ioannis]

...looks like I jumped the gun there...

? I am not sure i follow...

You are welcome!

Ioannis

[Navaidstech]

In my previous message I indicated that once the baud rate was changed, the original program that I posted was working ok.
Then I noticed some errors popping up so I decided to delve further into the program... it didn't look right so I decided to use your untested routines and they worked great.

Thanks again!