I just got the whole programming kit today making the jump from the basic stamp and picaxe chips, so im not a total noob. I have a few 12f675's and a 12f629 and cannot get the simple Blink sample program to work. If I even program a HIGH 0 command, I only get 2.5 volts from pin 0 with a multimeter. Im using a 7805 (5 volts) to power it. If I HIGH 1 then I get 2.5v on pin 1, so the commands are hitting the right pin, they just arent 5 volts. Also, the blink program makes the selected pin stay at 2.5v and doesnt blink. I hope this is a simple common problem?

Thanks all.

Jason