Problem with porta for 16F886(PIC 28X1)

[mister_e]

Can't help with your programming environment/setup as we use Melabs PICBasic Pro here, but you may have a look at PIC16F886 datasheet.

Section 8 Comparator
CM1CON0 = 0 ' disable comparator
CM2CON0 = 0 ' disable comparator

Section 9 ADC
ANSEL=0 ' disable all ADC

PicAxe forum
http://www.picaxeforum.co.uk/

[Anghel Cosmin]

Thank you very much for your help! I posted my problom to the picaxe forum and i hope to resolve this impediment. So, thank you very much again!