Servo reverse

[bill_23]

Wow,
That was really simple, i was really getting hung up on this but i changed one side to 100 and one to 200 and it seems to work just how i want! This also got rid of the fidget in the opposite direction, except on a couple of the cheapo servos i am using but i just changed the 200 to a 190 and it stopped it from bouncing at the end.
Thank you all very much!
Now as far as Acetronics said

3) The Pulses MUST be sent regularly @ ~ 30-50 times per second. Even if the servo has to keep on its position.

If it works now should i change it? I am using very cheap ($3) servos, and some ones from parallax and i assume they are analog.
Thanks again

[Acetronics2]

Wow,
If it works now should i change it? I am using very cheap ($3) servos, and some ones from parallax and i assume they are analog.
Thanks again

Generally, if a µP program works as you expected ... Do not change anything until you have a VERY good reason to change it ...

AND Overall ... do not wipe off the first project until the new one has successfully passed ALL the "live" tests ...

Alain