Ahhh, thanks Darrel... where would this forum be without you! No problem too large or small.

I don't know what happened with the return inside my main loop... Bad late night cut & paste I guess. Thanks for pointing that out!

About TMR1GIE (PIE1.7)...
I've gone back and re-re-re-read section 12.6 (and figure 12-6) about the timer1 gate and "toggle mode" again, and also the "Timer 2 Time Base Setup" section of AN1171, and a few things are starting to make more sense... and it appears that the interrupt I want to watch is NOT the TMR2 to PR2 match, it's the Timer 1 Gate Event Interrupt , "TMR1GIF"(PIR1.7) . That explains some of the other weird results I've had.

I don't see the "Timer 1 Gate Event Interrupt" listed in the Available Interrupt Sources on your website Darrel. Is there a way for me to add that to the selection so i can use TMR1GIF with "Instant Interrupts"?

Thanks very much for your help! Hopefully I'll be able to get the Touch Sensor thing figured out and be one of the first to post a chunk of working code for it.


Steve