blinking basic

[mister_e]

Try this

        @   DEVICE      INTRC_OSC_NOCLKOUT, WDT_OFF,PWRT_ON,MCLR_OFF
        @   DEVICE      PROTECT_OFF, CPD_OFF,BOD_OFF
        @   DEVICE      IESO_OFF, FCMEN_OFF,LVP_OFF
        @   DEVICE2     BOR21V, WRT_OFF
      
        DEFINE OSC 4
        OSCCON = %01100001
        PORTD = 0
        TRISD = 0
loop:   
        PORTD.0 = 1 ' Turn on LED connected to PORTD.0
        Pause 500 ' Delay for .5 seconds
        
        PORTD.0 = 0 ' Turn off LED connected to PORTD.0
        Pause 500 ' Delay for .5 seconds
        
        Goto loop ' Go back to loop and blink LED forever
        End

Also, have a look at this link.
http://www.picbasic.co.uk/forum/showthread.php?t=543

HTH

[mister_e]

If you use MPASM as assembler, you can use the line in your ASM code at the top, but still followi the instruction in post #5 i Posted above.

@    __CONFIG _CONFIG1, _LVP_OFF & _FCMEN_OFF & _IESO_OFF & _BOR_OFF & _CPD_OFF & _CP_OFF & _MCLRE_OFF & _PWRTE_ON & _WDT_OFF & _INTRC_OSC_NOCLKOUT
@    __CONFIG _CONFIG2, _WRT_OFF & _BOR21V

[loyalty_card]

Try this

        @   DEVICE      INTRC_OSC_NOCLKOUT, WDT_OFF,PWRT_ON,MCLR_OFF
        @   DEVICE      PROTECT_OFF, CPD_OFF,BOD_OFF
        @   DEVICE      IESO_OFF, FCMEN_OFF,LVP_OFF
        @   DEVICE2     BOR21V, WRT_OFF
      
        DEFINE OSC 4
        OSCCON = %01100001
        PORTD = 0
        TRISD = 0
loop:   
        PORTD.0 = 1 ' Turn on LED connected to PORTD.0
        Pause 500 ' Delay for .5 seconds
        
        PORTD.0 = 0 ' Turn off LED connected to PORTD.0
        Pause 500 ' Delay for .5 seconds
        
        Goto loop ' Go back to loop and blink LED forever
        End

Also, have a look at this link.
http://www.picbasic.co.uk/forum/showthread.php?t=543

HTH

thanks i have read a little about configs but still unclear i guess the link will explain more also i pasted your code had the same error as before but code works fine, also this popped up while building


also forgot to mention this is all new to me i haven't created my own code yet i don't know what the variables, configs and commands are and what they can do for any PIC let alone my 44 16f887 demo board ;x

[mister_e]

The error you have is because you're using MASm as assembler, so just replace all @ DEVICE line with those i've posted one post before.

[loyalty_card]

The error you have is because you're using MASm as assembler, so just replace all @ DEVICE line with those i've posted one post before.

thank you for making the code look tidy

but i still get an warning error in the programmer and now only 1 error after building

error[118] projectpath.asm 52: overwriting previous address contents (2007)

@    __CONFIG _CONFIG1, _LVP_OFF & _FCMEN_OFF & _IESO_OFF & _BOR_OFF & _CPD_OFF & _CP_OFF & _MCLRE_OFF & _PWRTE_ON & _WDT_OFF & _INTRC_OSC_NOCLKOUT
@    __CONFIG _CONFIG2, _WRT_OFF & _BOR21V
      
        DEFINE OSC 4
        OSCCON = %01100001
        PORTD = 0
        TRISD = 0
loop:   
        PORTD.0 = 1 ' Turn on LED connected to PORTD.0
        Pause 500 ' Delay for .5 seconds
        
        PORTD.0 = 0 ' Turn off LED connected to PORTD.0
        Pause 500 ' Delay for .5 seconds
        
        Goto loop ' Go back to loop and blink LED forever
        End

so using picbasic still uses asm code? my compiler is set c:/pbp shall i uncheck the use mpasm assembly

also im thinking to order this book ;o

30 Projects Using PIC BASIC and PIC BASIC PRO

[mister_e]

As I said go to this link
http://www.picbasic.co.uk/forum/showthread.php?t=543

Look post #5

And no, don't switch to PM assembler, it just don't worth it.

You'll see it's pretty easy once you catch it.

[loyalty_card]

thanks you have been helpfull i will post again when i have something cool to show =)

[nomad]

and another person hooked on pics