elec_mech, you are really helpful and thank you for finding those links for me.In regards to some of your questions, yes, I will be using serout to "wireless" interface like this:

me -> push buttons on remote -> remote has 16F684 in it -> which is connected to an RF transceiver (or transmitter "tx") -> sends the info about me pushing the button(s) -> transceiver (or receiver "rx") in car receives info -> transceiver forwards received info. to another 16F684 chip in the car that is connected to either 3 or 4 rumble motors (dc) without the weights on the spindles -> this controls forward and reverse motions. With some gears and just 3 motors (two on back and one of front between two front tires with spindle facing upward) I can make a steering system.

That right there sums up my plan for this. I don't need anything fancy for controlling the car, nothing that exceeds 30M probably (RF quality).

I am still lost on what actual supplies I can use that are not too expensive. If you have done something like this before I would greatly appreciate either a sample code, parts list, or guides for me. I really appreciate all of your help...this is going to be a really important event for me if I finish this as it will be one of the biggest completed codes I could possibly make. With the knowledge that I attain from this, I can put it to use in the future. Anyways, thanks...just keep all this information rolling guys.

Regards,

n0rig