Nice!
And a LCD that looks identical as the one that I have cannibalized out of a nokia phone and going to solder wires on to use with my PIC's
Do you want to post the updated code too ?
..This is how far I got..
http://www.repulsiv.se/pics/accelero...breadboard.jpg
Your setup is much more elegant
..Note that I already connected a cable for an Z-axis, I bought a prototypeboard with a 3-axis accelerometer from sure electronics that I'm going to use too.
The "normal" value seem to be 120, and using 8bit AD-converter that would be.. lets se..
5v Vref /256 = 0,01953125
120 * 0,01953125 = 2,34375
With a Vref at 5v 1G should be 2.5V, so its a bit strange..
I have to make some effort at making PBP do that math and display the "real" G-value too.. readed Melanies thread about it but.. well
Bookmarks