picbasic pro SD_MMC

[iw2fvo]

Thanks,
this is a good starting point.
Iw2fvo

[anode505]

I'm just getting back into tinkering again. But if memory serves me right a SD card is basically a SPI interface. Now if you want the card to be read in a PC also, then things get a lot stickier.

[BrianT]

Have a look at

www.jianpingusa.com

for a ready built solution. Runs with PBP at 19,200 bps.

I bought a pair and got them very promptly. They are to be used in my next project and not used just yet.


HTH
BrianT

[kirtcathey]

Jerson >> That compsys link only has a schematic. Do you have that Picbasic code? A link for the code is there, but it's dead or wrong, or something.

[Melanie]

The code is still there - and it's downloadable. The link opens up a Directory, thereafter just click the file you want, BAS, HEX etc. I've had a quick look at the BAS file, and it is recognisable as PBP...

[kirtcathey]

Thanks Melanie. Been reading your posts, thanks for all the help.

It is right there!

(Scratching head....)

--Kirt

[iw2fvo]

I'm just getting back into tinkering again. But if memory serves me right a SD card is basically a SPI interface. Now if you want the card to be read in a PC also, then things get a lot stickier.

Thanks,
I do not want to read the sd mmc cards using the PC: i will like to read / write it just using the PIC . I will like to have a sample program in basic if any.
Any help is appreciated .
Yhanks
IW2FVO
Ambrogio

[Bruce]

Have a look here: http://melabs.com/resources/samples/pbp/SDFS1.ZIP

[iw2fvo]

Have a look here: http://melabs.com/resources/samples/pbp/SDFS1.ZIP

Thanks a lot Bruce for the program relevant to mmc read / write in basic for the PIC .
That is great : I am very happy about that.
I will try it ... and could be i will ask few other questions !

Bye
iw2fvo
Ambrogio
North Italy

[kirtcathey]

Bruce,

I too really appreciate the posting above and all the other help provided on this forum.

--Kirt

[gem1144aaa]

Bruce,

I too really appreciate the posting above and all the other help provided on this forum.

--Kirt

http://melabs.com/resources/samples/pbp/SDFS1.ZIP

Just want to say that this link is changed now to be as

http://melabs.com/resources/samples/pbp/sdfs3.zip

regards