Joystick or Game Controller Output Signals...


Closed Thread
Results 1 to 7 of 7

Hybrid View

  1. #1
    Join Date
    Oct 2008
    Location
    Ashland, KY
    Posts
    45


    Did you find this post helpful? Yes | No

    Default

    Thanks guys, that info is definately what I needed. I'm sure I'll be able to figure out exactly what I need from the links elec mech posted and the document Dave had posted.

    I had actually found that document (the one posted by Dave) by searching yahoo, but that was on a different computer so I don't have the link or website with me on my notebook here at school. Thanks for the help and info, guys-I really appreciate it! Now if I can only find a few free hours of time to actually play with those controllers and thouroughly read all that info...

    I am still a bit confused about most of the joysticks I had found. I couldn't find a matching plug on the pin-out site and I have no idea what system they're from (I thought NES or SNES). The one I thought was a PS1 was actually the NES/SNES joystick; I'm not really much of a gamer, so I made a wrongful assumption-my bad. Oh well-I'm sure I'll figure it out and find the pin-out and related info I need from those posted links. Thanks again, guys!
    -Adam Collins

  2. #2
    Join Date
    Mar 2003
    Location
    Commerce Michigan USA
    Posts
    1,166


    Did you find this post helpful? Yes | No

    Default

    Adam, Here is the connector for the PS2 if you need it...

    Dave Purola,
    N8NTA
    Attached Files Attached Files

  3. #3
    Join Date
    Oct 2008
    Location
    Ashland, KY
    Posts
    45


    Did you find this post helpful? Yes | No

    Default

    Again, thanks guys! I saw some VERY interesting info in those links, and I've since figured out that the three unidentified joystick controllers are from an original NES, but I bought a PS2 dual-joystick controller just because I found some good info on that (with your help). Once I get a bit of free time to experiement and get those figured out, I'll "upgrade" to the Gamecube controller. Thanks for sharing such valuable info!
    -Adam Collins

  4. #4
    Join Date
    Jan 2006
    Location
    Istanbul
    Posts
    1,185


    Did you find this post helpful? Yes | No

    Default

    "If the Earth were a single state, Istanbul would be its capital." Napoleon Bonaparte

Similar Threads

  1. problem with the GSM controller
    By Dariolo in forum mel PIC BASIC Pro
    Replies: 4
    Last Post: - 30th May 2009, 21:33
  2. Help changing CCP3 output pin
    By ChrisHelvey in forum mel PIC BASIC Pro
    Replies: 2
    Last Post: - 15th July 2008, 03:30
  3. Bit Banging input to output on PIC16F876A
    By Bronurstomp in forum mel PIC BASIC Pro
    Replies: 12
    Last Post: - 26th June 2008, 20:50
  4. Serious Serial Situation Setbacks...
    By Dansdog in forum mel PIC BASIC Pro
    Replies: 5
    Last Post: - 7th February 2007, 04:46
  5. HSEROUT Newbie question/problem
    By Mark Scotford in forum mel PIC BASIC Pro
    Replies: 12
    Last Post: - 11th July 2006, 15:44

Members who have read this thread : 0

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts