ADCIN Problem

[skimask]

Hi guys, arriving late from work. I loaded a little schematic I hope is clear. On my project I have 4 LEDs. On this clean one I will use one. Will try 8 bits. I have used caps .1uF and 10uF connected to GND.

Let you know tomorrow about the 8 bits.

Javier.

From the picture...
There's a Vdd and Vss on each side of the PIC, 11-12 and 31-32. I only see one of each hooked up. I don't see any cap's across Vdd and Vss on each side.